1997 Ford F-250/350/Super Duty Steering Knuckle Removal Installation
download Removal 1. Remove the front wheel spindle (3105) and the right and left shaft and joint assembly. Refer to Spindle, RH and LH Shaft and Joint Assembly in the Removal and Installation portion...
View Article2005 Ford Expedition, Ford F-250, Ford F-350 TICKING AND/OR KNOCKING NOISE...
download FORD: 2005 Mustang 2004-2005 F-150 2005 Expedition, F-250, F-350 This article supersedes TSB 05-15-8 to update the Service Procedure. ISSUE Some vehicles equipped with a 4.6L 3-valve or 5.4L...
View Article2004 Saturn VUE Lower Ball Joint Replacement Removal Procedure
download 1. Remove the lower control arm. 2. Place the control arm in a vise or suitable holding device. 3. Remove the ball joint rivets using the following procedure. 3.1. Drill through the rivets...
View Article2002 Ford Explorer Ball Joint Removal and Installation
download 1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02. 2. Remove and discard the nut. 3. NOTE: The wheel speed sensor connectors are...
View Article1994 Ford Pickup F150 BALL JOINT Removal Installation
download NOTE: Always remove lower ball joint before removing upper ball joint. Install lower ball joint before installing upper ball joint. DO NOT heat ball joint or axle to aid in installation....
View ArticleFord / Mercury / Lincoln Band-Mounted Sensor Re-Learn Instructions
The instructions below can be used for the following vehicles: 2008 Ford Crown Victoria / Lincoln Town Car / Mercury Grand Marquis 2008 Ford E-series 2007-2009 Ford Edge / Lincoln MKX 2005-2008 Ford...
View Article2003 Ford Explorer Drivetrain – Limited Slip Differential Chatter
download LIMITED SLIP AXLE CHATTER, SHUDDER, BINDING SENSATION, OR VIBRATION DURING LOW SPEED TURNING MANEUVERS FORD: 2002-2004 Mustang, 2003-2004 Expedition 2004 F-150 LINCOLN: 2003 Navigator MERCURY:...
View ArticleENGINE MISFIRE 2003-2004 Mustang, 1999-2004 Navigator 2002-2003 Blackwood...
download Some 1999-2004 Navigator, 2002-2003 Blackwood, 2003-2005 Aviator, 2003-2004 Marauder and 2003-2004 Mustang vehicles built before 12/19/2004 equipped with 4.6L 4V/5.4 4V engine may exhibit a...
View ArticleFord Ranger upper ball joint replacement
download Subject: Ford Ranger upper ball joint replacement Vehicle involved: 1998-2002 Ford Ranger 2 wheel drive Condition: O.E.M. supplier sells the upper ball joint as an arm assembly; we sell the...
View ArticleFord Ranger upper ball joint replacement 1998-2002 Ford Ranger 2 wheel drive
download Repair Procedure: 1. Raise vehicle on hoist, and support lower control arm. 2. Remove wheel and tire assembly. 3. Mark position of upper eccentric camber bolts. 4. Remove upper ball joint...
View ArticleSingle-Nozzle Nitrous Kit 2001 Ford Escape,1999 Ford Ranger, Explorer & Sport...
NITROUS DELIVERY SYSTEMThe nitrous-oxide cylinder should be mounted in the cargo area, bed, or similar area, but not in the driver’s compartment. The positioning of the cylinder must be executed as...
View Article
